Slip Type Heavy Duty DL450-13 Aluminum wire drawing machine 132kw 6m/s - 17m/s

I  Summarize

This machine is used for electric wire industry to pull non-ferrous metal and alloy wire.The characteristics are small footprint, good cooling and lubricating properties, high production efficiency.

This machine is mainly composed by the Y series motor, inverter, gear boxes, gear pump high-pressure lubrication system, two three round tower (tower round 45 # steel ring, and the quenching process).Impermeable seam between the gear box and the tank left. La Sita round cooling and lubrication spray and immersion.

II The main technical parameters

Into the line of maximum diameter: 8mm

Out the line of minimum diameter: 1.33mm

Drawing pass: 13

Capstan speed: 450mm

Drawing material strength: δ≤90kgf/2

Total compression ratio: 84%

Average compression ratio: 20%-24%

Drawing speed: 6-17m/s

The PULL OPACIFYING fluid volume: 20m3/h

Motor Power: 132kw

Dimensions : 5250mm×1500mm×1300mm

Take-up configuration :double-disc collection lines

III Transmission structure

1, The machine consists of the Y series motor, inverter, gear, gear box, the winding gear, the water box and electrical system components of the machine.

2, the drawing machine up and down the wear mode drawing.